Contact Us
WhatsApp: +86-13833774667
Tel: +86-13833774667
No. 66, Sihe Village, Jiaohe Town, Botou City, Cangzhou City, Hebei Province, China
General signal elastic seat sealing gate valve
Share to
- 产品描述
- 产品优势
- 工艺流程
- 技术参数
-
Product Overview
The general signal elastic seat sealing gate valve is applied to the automatic sprinkler fire pipeline system to monitor the water supply pipeline and can remotely indicate the valve opening.
General signal soft sealed gate valves and gate valves with opening indication are often used in fire water supply systems. If the installation position of the gate valve is high above the ground, a rising stem gate valve is generally selected, and the valve opening indication can be clearly seen. If the installation position is low, the valve opening indication can be clearly seen. Then it is necessary to choose a gate valve with an opening indicator.
Product Requirements
1. The signal valve should have an output "on" and "off" electrical signal device. During the process of the signal valve from fully open to closed, when the contact that outputs the "on" signal (valve open) is converted to the output "off" signal (valve closed), the flow rate at this conversion point should be greater than or equal to 80% of the fully open flow rate. After this point, the valve will continue to output the "off" signal (valve closed). The fully open flow rate is the flow value measured when the signal valve is fully opened at a constant population pressure.
2. The signal valve shall undergo overload capacity testing according to standard regulations, and its electrical components shall not exhibit phenomena such as overheating, burning, pitting, or contact adhesion.
3. The signal valve shall undergo voltage endurance testing according to standard regulations. Under the specified test voltage, all moving and stationary components (including the casing) shall withstand voltage for 60 seconds ± 5 seconds without breakdown.
4. The signal valve shall undergo insulation resistance testing according to standard regulations, and the insulation resistance between the following components shall be greater than 2M Ω.
(1) When the electric shock is disconnected, between the same level incoming and outgoing lines
(2) Between each live component and the metal bracket (including the casing).
(3) The signal valve shall undergo contact resistance testing according to standard regulations, and the contact resistance between each pair of closed contacts of the switch shall be less than 0.01 Ω.
Keywords:
Introduction
We specialize in the production of a wide range of products, including gate valves, filters, automatic and manual self-cleaning filters, water hammer arrestors, flow meters, flow switches, explosion-proof valves, silent check valves, vortex preventers, angular strainers, mud discharge valves, sand separators, and more.
Our facility is fully equipped, with rational design and continuous technological innovation. All products meet national standards, and we consistently ensure high quality, striving to achieve customer satisfaction. We are committed to serving clients worldwide, promoting economic growth, and contributing to society. Guided by a people-oriented and market-driven approach, we provide reliable products and trustworthy services. Customized solutions are also available based on client drawings and requirements.
Workshop
Customized Shipping Process
Order Notes
We are committed to serving clients worldwide, promoting economic growth, and contributing to society. Guided by a people-oriented and market-driven approach, we provide reliable products and trustworthy services. Customized solutions are also available based on client drawings and requirements.
All goods will undergo strict inspection before shipment. Please check them carefully upon receipt. If there are any problems, please contact us in time.
Online communication
Provide customized drawings
Merchant's quotation
Sign a contract
Processing and production
Packaging and delivery
Confirm receipt of goods
Transaction successful
